DSGW-020 QA

Q

Hello, I am looking for an IoT gateway that we can use to control both WiFi and Zigbee devices. We need that more than 64 WiFi devices can simultaneously connect to the gateway whent it behaves like a WiFi access point. Also, we need Ethernet and LTE connectivity to forward data from the devices to our cloud.

We would like to connect a number of WiFi actuators to our gateways. They allow to turn on and off appliances as well as monitor their energy consumption

Also, we would like to use a number of temperature Zigbee sensors

We use a number of services hosted on AWS

A

#1、I think our DSGW-023 will meet your requirements.
#2、On board storage
3) On board storage (8GB EMMC or possibility to use an external SD card)
For this point DSGW-023 is 4GBemmc, but can upgrade to 8GB.
#3、Fully programmable
4) Fully programmable (we need to install our software on the gateways)
YES, our gateway is programmable. we provide you quickstart and sdk.
#4、Gigabit Ethernet connectivity
YES, 023 is gigabit ethernet port

Q

Hi, can you add lorawan to your custom gateways?
Looking to create a wireless router with lorawan, for home users,
o they can just replace there home internet router with a home lorawan internet router?
Do you do this type of customisation?
https://io.wi360.net/

for the Quantity will start small, and grow as we grow, wer currently looking 500 to 1000.

I just want to keep it simple on the development stange, just a router with lorawan, and a logo.
Can you preconfure the software to have our server setings in already?

A

Check the gateway DSGW-024 IoT Router Gateway v1.0

Q

Now we are looking for a router as below spec. 1.Full mini PCle slot(LTE module)2 WiFi 3.Bluetooth 4.Zigbee If you have the similar router, please send the spec. sheet. we need the router supporting 4G LTE, WiFi, Bluetooth and Zigbee.

A

IEC 60870-5 part 104 enables communication between IED, RTU control station and substation via a standard TCP/IP network. The TCP protocol is used for connection-oriented secure data transmission. IEC 60870 5104 protocol (IEC 104) is a part of IEC Telecontrol Equipment and Systems Standard IEC 60870-5 that provides a communication profile for sending basic telecontrol messages between two systems in electrical engineering and power system automation. IEC 60870 part 5 is one of the IEC 60870 set of standards which define systems used for telecontrol (supervisory control and data acquisition SCADA) in electrical engineering and power system automation applications. Part 5 provides a communication profile for sending basic telecontrol messages between two systems, which uses permanent directly connected data circuits between the systems. The IEC Technical Committee 57 (Working Group 03) have developed a protocol standard for telecontrol, teleprotection, and associated telecommunications for electric power systems.

Our gateway support this interface and we can migrate it if required.